11 28... Removing And Installing/Replacing Radial Compressor Deflection Pulley (BMW ALPINA B7)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove support block . See 11 14... REMOVING AND INSTALLING/REPLACING SUPPORT BLOCK FOR RADIAL COMPRESSOR (BMW ALPINA B7) .
Release bolts (1) and remove deflection pulley (2).
Installation:
Tightening torque: 21 Nm.