61 67 083 Removing And Installing/Replacing Left Or Right High-Pressure Nozzle Of Headlight Cleaning System

WARNING: This page is about a different car, the 2006 BMW 760i, 2005 BMW 760i, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

13 3 010

Remove front bumper trim. See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .

To prevent excess escape of washer fluid, seal off end of high - pressure line with special tool 13 3 010 .

Fig 1: Identifying Special Tool (13 3 010)

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock H.P. line (3) and detach from H.P. nozzle (1).

Release screws (2).

Remove H.P. nozzle (1).

Fig 2: Identifying H.P. Nozzle And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Slide guide (2) into opening (1).

New spray nozzles are already preset.

Carry out function check.

Fig 3: Identifying Slide Guide In Opening

Courtesy of BMW OF NORTH AMERICA, INC.