51 13 401 Removing and Installing/Replacing Handle Strip (On Rear Lid)

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove both rear lights in rear lid See 63 21 183 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT REAR LIGHT (FROM 03/2005) (ON REAR LID)

Release screws (1).

Snap handle strip (2) in direction of arrow out of clips (3) and remove.

Fig 1: Snapping Handle Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty clips (1).

Replacement:

Remove both bulbs for number/license plate light . See 63 99 401 REPLACING BULB FOR LEFT OR RIGHT NUMBER/LICENSE PLATE LIGHT (FROM 03/2005)

Fig 2: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.