51 11 ... Removing and Installing/Replacing Cover For Headlight Washer System On Left

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove body molding for bumper. See 51 11 170 REPLACING BODY MOLDING FOR LEFT OR RIGHT BUMPER

Build date up to 03/2005:

Release screws (1).

Remove cover (2) towards top.

Fig 1: Identifying Screws & Covers (1 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Build date from 03/2005:

Release screws (1).

Remove cover (2) towards front.

Fig 2: Identifying Screws & Covers (2 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Detach flap (1) sideways from bearing support (2).

Fig 3: Detaching Flap Sideways From Bearing Support

Courtesy of BMW OF NORTH AMERICA, INC.