51 11 170 Replacing Body Molding For Left or Right Bumper

WARNING: This page is about a different car, the 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 321

Unclip body molding (1) with special tool 00 9 321 .

Remove body molding (1) towards front.

Fig 1: Identifying Body Molding With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Version with PDC:

Remove ultrasonic transducer . See 66 20 540 REMOVING AND INSTALLING/REPLACING A REAR ULTRASONIC TRANSDUCER (PARK DISTANCE CONTROL)

Remove holder (1).

Version with Chromeline:

Release catches (2) and remove chrome trim from body molding.

Fig 2: Identifying Holder & Catches

Courtesy of BMW OF NORTH AMERICA, INC.