65 77 541 Removing and Installing/Replacing Front Left Or Right Acceleration Sensor
WARNING: This page is about a different car, the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, and 2007 BMW 750Li. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Acceleration sensor only fitted in US version!
Necessary preliminary tasks:
- Remove front bumper trim . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM
Disconnect plug connection (1).
Release screws (2) and remove acceleration sensor (3).
Installation:
Tightening torque 65 77 9AZ . See 65 77 AIRBAG TRIGGERING CONTROL
Replace screws (2).