51 11 156 Removing And Installing Front Bumper Trim
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove both PROTECTIVE STRIPS
- Remove BASEPLATE for number/license plate
Build date up to 03/2005:
- Remove both FOG LAMPS
Build date from 03/2005:
- Remove both SIDE GRILLES
Release screws (1) or clip (1) on left/right.
Release screws (1).
IMPORTANT:
Bumper trim must not be pulled out sideways (risk of damage).
Remove bumper trim straight towards front with aid of a 2nd person.
If necessary, disconnect additional plug-in contacts and feed out cable.
Installation:
Observe gap dimensions.