LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1239 (Heating And Air Conditioning - Repair Instructions) >> 11 Heater With Operation >> 64 11 911 Removing and Installing/Replacing Temperature Sensor For Heating Unit (Automatic A/C High)

64 11 911 Removing and Installing/Replacing Temperature Sensor For Heating Unit (Automatic A/C High)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Remove and install panel for pedal assembly.  See 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY

Remove center console trim at front left.  See 51 16 195 REMOVING AND INSTALLING CENTRE ARMREST (FRONT)

Remove sound insulation for A/C unit at rear left.

Disconnect plug connection (1).

Pull out temperature sensor (2) in direction of arrow.

Fig 1: Removing Temperature Sensor
G04768891Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

When installing temperature sensor, pay attention to guide (1) in mount (2).

Fig 2: Identifying Guide & Mount
G04768892Courtesy of BMW OF NORTH AMERICA, INC.