61 67 083 Removing And Installing/Replacing Left Or Right High-Pressure Nozzle Of Headlight Washer System (From 03/2005)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 13 3 010
Necessary preliminary tasks:
- Remove front bumper trim . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .
To prevent excess escape of washer fluid, seal off end of high - pressure line with special tool 13 3 010.
Unlock high-pressure line (2) and detach from high-pressure nozzle (1).
Release screws (3).
Remove high-pressure nozzle (1).
Installation:
New spray nozzles are already preset.
Check function.