51 32 420 Removing And Installing/Replacing Trim On Front Door Window Frame, Left Or Right

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front WINDOW CAVITY COVER STRIP

Partially detach rubber window seal (1) at rear.

Installation:

Coat rubber window seal (1) with water before fitting.

Fig 1: Detaching Rubber Window Seal

G04767890

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Press trim (2) towards rear and lever out sideways.

Fig 2: Pressing Trim

G04767891

Courtesy of BMW OF NORTH AMERICA, INC.

Remove trim (1) towards top.

Fig 3: Removing Trim

G04767892

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty plastic nuts (1).

Fig 4: Identifying Plastic Nuts

G04767893

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check trim (1) for damage, replace if necessary.

Fig 5: Identifying Trim

G04767894

Courtesy of BMW OF NORTH AMERICA, INC.