51 21 302 Removing And Installing/Replacing Chrome Strip For Window Cavity Cover Strip (On Outside Of Front Door)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 311

Attach adhesive tape (1) below window cavity cover strip (2) (risk of damage).

Fig 1: Identifying Adhesive Tape Below Window Cavity Cover Strip

G04767718

Courtesy of BMW OF NORTH AMERICA, INC.

Using special tool 00 9 311 beginning at rear (1) proceeding to front (2), lever out window cavity cover strip.

Fig 2: Removing Window Cavity Cover Strip

G04767719

Courtesy of BMW OF NORTH AMERICA, INC.

Pull window cavity cover strip (1) out of mirror (2) in direction of arrow and remove.

Installation:

Moisten window cavity cover strip (1) with water.

Window cavity cover strip (1) must be flush at rear to door edge.

Fig 3: Pulling Window Cavity Cover Strip Out Of Mirror

G04760996

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seal (1) must be correctly fitted in chrome strip (2).

INITIALIZE POWER WINDOW .

Fig 4: Identifying Seal And Chrome Strip

G04767721

Courtesy of BMW OF NORTH AMERICA, INC.