51 23 Hood/Bonnet Locks
WARNING: This page is about a different car, the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, and 2007 BMW 750Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HOOD/BONNET LOCKS
| - | Type | Tightening specification | Measure |
|---|---|---|---|
| 1AZ Retaining hook to engine hood/bonnet (replace microencapsulated screws) | E46/E52/E53/E60/E61/E63/E64/E65/E66/E83/E85/E86 | - | 10 Nm |
| - | E38/E39 | - | 12 Nm |
| - | E36 | Hexagon screw | 10 Nm |
| - | - | Torx bolt | 12 Nm |
| 2AZ Lock to body (replace microencapsulated screws) | E36/E38/E39/E46/E52/E53/E60/E61/E63/E64/E83 | - | 10 Nm |
| - | E65/E66/E85/E86 | - | 8 Nm |
| 3AZ Lock to engine hood/bonnet (replace microencapsulated screws) | E36/E46/E52 | - | 10 Nm |
| - | E39 | - | 12 Nm |