51 13 401 Removing And Installing / Replacing Handle Strip (On Rear Lid)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove both REAR LIGHTS IN REAR LID

Release screws (1).

Snap handle strip (2) in direction of arrow out of clips (3) and remove.

Fig 1: Snaping Handle Strip Out Of Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty clips (1).

Replacement:

Remove both BULBS FOR NUMBER/LICENCE PLATE LIGHT .

Fig 2: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.