LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1233 (Body Equipment - Repair Instructions) >> 13 Trim, Covers, Handle Trim >> 51 13 007 Removing And Installing/Replacing Trim Ring For Front Grille Centre Section

51 13 007 Removing And Installing/Replacing Trim Ring For Front Grille Centre Section

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Lever out catches (1 and 2) and remove trim ring.

Fig 1: Identifying Catches
G04767505Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Catches (1) and guides on trim ring (2) must not be damaged.

Fig 2: Identifying Catches And Guides On Trim Ring
G04767506Courtesy of BMW OF NORTH AMERICA, INC.