51 13 000 Removing And Installing/Replacing Front Grille Centre Section

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove RETAINING HOOK FROM ENGINE HOOD/BONNET

Unfasten screws (1 and 2).

Remove front grille centre section (3) downwards.

Installation:

Align front grille centre section (3) to engine hood/bonnet and secure with screws (2).

Fig 1: Identifying Front Grille Centre Section

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) must not be damaged or missing.

Replacement:

Remove TRIM RING (2) FOR FRONT GRILLE
Remove TRIM (3) FROM FRONT GRILLE

Fig 2: Identifying Trim, Trim Ring And Clips

Courtesy of BMW OF NORTH AMERICA, INC.