52 17 405 Replacing Backrest Cover For Left Or Right Front Seat (Comfort)

Necessary preliminary tasks: 

• Remove front seat
• Remove both rear panels on front seat backrest
• Remove inner cover on front seat

Long version only: 

• Remove monitor panel holder

Detach plug connection (1) by twisting from backrest frame.

Disconnect plug connection (1).

Fig 1: Detaching Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unhook backrest cover (3) in areas (1).

Detach all retainers in areas (2).

Installation: 

Bend new retainers closed with pliers 52 0 050 .

Fig 2: Identifying Backrest Cover And Retainers In Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Release all cable ties (1).

Disconnect all plug connections (2).

Fig 3: Identifying Cable Ties And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Remove backrest cover (2) complete with padding towards front.

Installation: 

Adjusting unit (1) must be secured on left and right in opening of padding.

Fig 4: Identifying Backrest Cover And Adjusting Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Detach all retainers in areas (1).

Fig 5: Identifying Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Release all retainers.

Installation: 

Bend new retainers closed with pliers 52 0 050 .

Remove backrest cover (1) from padding.

Remove all remnants of clips from backrest cover (1) and padding.

Fig 6: Locating Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Pull trim threads (1) out of backrest cover.

Installation: 

Push trim threads (1) into new backrest cover.

If necessary, cut into new component.

Fig 7: Identifying Trim Threads

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out locking strip of head restraint guide with special tool 00 9 317 .

Installation: 

Mount straight front face of head restraint guide towards front.

Fig 8: Identifying Special Tool (009317)

Courtesy of BMW OF NORTH AMERICA, INC.