4111028 Stripping Operations - Replacing Left Engine Support (Partial Replacement Before Front Axle)
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
- Clamp off battery lead from negative terminal
- Remove bumper trim (FR flat rate number: 5111156)
- Remove bumper carrier (FR number: 5111050)
- Remove and install intake filter housing (FR number: 1371000)
- Remove front panel (FR number: 4133040)
- Remove and install left wheel arch cover (front section) (FR number: 5171038)
- Remove and install A/C system condenser (FR number: 6453550)
- Remove and install hydraulic steering cooling coil (FR number: 1711370)
- If necessary, remove and install intercooler (FR number: 1751000)
- Partially release left wiring harness