LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Seats - Repair (E82)) >> Front Seat, Normal, Manual >> 52 13 025 Removing And Installing/Replacing Left Or Right Seat Mechanism (Normal/Manual)

52 13 025 Removing And Installing/Replacing Left Or Right Seat Mechanism (Normal/Manual)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks: 

Disconnect all cable ties.

Unlock plug housing (1) from flexmat and disconnect.

Release seat wiring harness (2) from cable holders on seat mechanism.

Fig 1: Identifying Seat Wiring Harness From Cable Holders On Seat Mechanism
G04727010Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only: 

The seat mechanism is supplied complete with corresponding drive units.