51 13 286 Replacing Bracket For Roof Luggage Rack On Left Or Right

WARNING: This page is about a different variant/trim than selected.

Special Tools Required

00 9 322

Necessary preliminary tasks:

Remove trim strip from roof frame .

Remove body sealing compound (1) with special tool 00 9 322 and unfasten threaded pin (2).

Fig 1: Identifying Body Sealing Compound & Threaded Pin

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Threaded pin is designed as Torx from E87 model series.

Installation:

Threaded pin may not be wetted with screw securing adhesive on screw-in thread (1).

Before installing threaded pin, protect body against corrosion (e.g. apply zinc dust paint).

Tightening torque, see 51 13 1AZ in 51 13 TRIM PARTS, COVERS, HANDLE TRIM .

Fig 2: Identifying Screw-In Thread

Courtesy of BMW OF NORTH AMERICA, INC.

Apply body sealing compound (1) (Terostat 9320, sourcing reference: BMW Parts Service) to threaded pin (2) all round.

After hardening time of body sealing compound (1), paint over body sealing compound (1) and threaded pin (2) with paint pencil of corresponding car color.

Fig 3: Identifying Body Sealing Compound & Threaded Pin

Courtesy of BMW OF NORTH AMERICA, INC.