61 71 100 Removing And Installing/Replacing Windshield Washer Pump
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Release fluid reservoir for windshield washer system and pull out
Disconnect plug connection (1).
NOTE:
Catch any escaping washer fluid if necessary.
Detach hose (2) from windshield washer pump (3).
Turn windshield washer pump (3) if necessary and pull in direction of arrow out of fluid reservoir for windshield washer system (4).
Installation:
- Replace strainer for windshield washer pump
- Coat sealing ring of windshield washer pump with anti-seize agent
- Lay hose of windshield washer pump without kinks
- Fill fluid reservoir