61 67 010 Removing And Installing/Replacing Washer Pump Of Headlight Washer System

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Disconnect plug connection (1).

NOTE: Catch any escaping washer fluid if necessary.

Open split pin (3) and detach hose (2) from washer pump of headlight cleaning system (4).

If necessary, turn washer pump of headlight cleaning system (4) and pull out of fluid reservoir for windshield washer system (5).

Fig 1: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace strainer for washer pump of headlight washer system.
Coat sealing ring of washer pump for headlight cleaning system with anti-seize agent.
Lay hose of washer pump for headlight cleaning system without kinks
Fill fluid reservoir