LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (General Electrical System - Repair (E82)) >> Control Units, Modules >> 61 35 115 Removing And Installing/Replacing Footwell Module

61 35 115 Removing And Installing/Replacing Footwell Module

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: Read and comply with notes on protection against electrostatic damage ESD   protection)  .

Necessary preliminary tasks: 

Disconnect plug connection (1).

Release nuts (2) and remove footwell module (3).

Fig 1: Identifying Footwell Module, Plug Connection & Nuts
G04727640Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out vehicle programming/coding.