24 11 007 Replacing Sealing Plug (GA6L45R)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 24 4 340 . See 24 4 340 LEVER .
IMPORTANT:
After completion of work, check transmission oil level
. See 00 11 237 CHECKING/TOPPING UP FLUID LEVEL IN AUTOMATIC TRANSMISSION (GA6L45R)
. Use only the approved transmission fluid. Failure to comply with this requirement will result in serious damage to the automatic transmission!
Necessary preliminary tasks:
- Remove rear underbody protection . See 51 47 491 REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION (CONVERTIBLE) or 51 47 491 REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION (COUPE) .
Remove holder (2).
Unlock sealing plug with special tool 24 4 340 in direction of arrow and remove.