23 11 608 Replacing Guide Tube For Clutch Release Unit (GS6-17BG/DG)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove transmission . See 23 00 017 Removing And Installing Transmission (GS6-17BZ) N51/N52/N52K/N53 .
- Remove clutch controller and release lever from guide tube. See 21 51 500 REMOVING AND INSTALLING OR REPLACING CLUTCH RELEASE BEARING/LEVER .
Release screws.
Remove guide tube.
Tightening torque, see 23 11 2AZ in HOUSING WITH COVER .
Installation:
Replace screws.
Clean new guide tube.
Guide surface must be clean (no labels/stickers or residual adhesive, etc.).