22 11 100 Replacing Right Engine Support Arm (N51/N52/N52K/N53)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
Remove right engine mount . See 22 11 001 REPLACING RIGHT ENGINE MOUNT (N51/N52/N52K/N53) .
Release screws (1).
Remove engine support arm from engine.
Installation:
Aluminum screws/bolts must be replaced.
Tightening torque. See 22 11 3AZ in 22 11 ENGINE SUSPENSION .
NOTE:
Illustration similar