51 11... Removing and installing/replacing cover for headlight washer unit on left

Special tools required:

Version without headlight washer unit (SRA):

With bumper trim fitted, unclip cover (1) with special tool 00 9 341 .
With bumper trim removed, unclip cover (1) from inside.

Fig 1: Unclipping Cover With Special Tool
Courtesy of BMW OF NORTH AMERICA, INC.

Press catch together.

Feed cover (1) out of carrier (2).

Fig 2: Identifying Cover And Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Version with headlight washer unit:

Carefully open out cover (1).

Press catches (2) together and feed out cover (1) in outward direction.

Fig 3: Identifying Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Removing lever for headlight washer unit cover:

Release spring (1) and remove lever (2).

Fig 4: Removing Lever

Courtesy of BMW OF NORTH AMERICA, INC.