51 14 000 Removing and installing/replacing front BMW badge

Special tools required:

IMPORTANT:

Risk of damage!

To avoid damaging the paintwork on the engine compartment lid, tape off edge areas (1) to sides of guide pins.

So as not to subject the BMW badge to excessive deformation, lever out the badge with special tool 00 9 318 at guide pins (2).

Fig 1: Identifying Special Tool At Guide Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts must not be damaged or missing:

Badge
Guide pins
Grommets

Fig 2: Identifying Badge, Guide Pins, Grommets And Adhesive Tape
Courtesy of BMW OF NORTH AMERICA, INC.