11 28 020 Replacing alternator drive belt tensioner (N52)
Special tools required:
- 11 3 340
IMPORTANT:
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts exclusively.
Aluminium screws/bolts must be replaced each time they are released.
The end faces of aluminium screws/bolts are painted blue for the purposes of reliable identification.
Jointing torque and angle of rotation must be observed without fail (risk of damage ).
Necessary preliminary tasks:
- Remove Drive Belt.
Remove special tool 11 3 340.
Release screw (3).
For tightening torque refer to 11 28 1AZ in 28 V-RIBBED BELT WITH TENSION AND DEFLECTION ELEMENT .
Installation:
Replace aluminium screws.
Assemble engine.