63 17 060 Removing and installing (replacing) left or right front fog lamp

Unclip fog lamp trim (1) through opening (2) and remove from front bumper trim (3).

Fig 1: Uncliping Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining hooks (1) of fog lamp trim (2) must not be damaged.

Make sure fog lamp trim (2) is correctly seated in front bumper trim (2).

Fig 2: Retaining Hooks Of Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Feed fog lamp (2) in direction of arrow out of front bumper trim (3).

Unlock associated plug connection and disconnect.

Remove fog lamp (2).

Fig 3: Fog Lamp And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Adjust front fog lamps, see 63 10 014 Adjusting fog lamps .

If necessary, convert bulb.

Installation: