63 10 014 Adjusting fog lamps

Comply with test preconditions for headlight adjustment, see 63 10 ... Test requirements for headlight vertical aim adjustment .

Unclip fog lamp trim (1) through opening (2) and remove from front bumper trim (3).

Fig 1: Uncliping Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Retaining hooks (1) of fog lamp trim (2) must not be damaged. Make sure fog lamp trim (2) is correctly seated in front bumper trim.

Fig 2: Retaining Hooks Of Fog Lamp Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Adjust fog lamp (1) by turning adjusting screw (2).

Fig 3: Fog Lamp And Adjusting Screw

Courtesy of BMW OF NORTH AMERICA, INC.