51 16 045 Removing and installing/replacing retaining ring on left or right door mirror (M5/M6)

Necessary preliminary tasks:

Release screws (1). Release retaining ring (2) at catches (3) and remove towards rear. Tightening torque, see 51 16 14AZ in 51 16 MIRRORS, FINISHERS, ASHTRAYS, CONSOLES .

Fig 1: Release Retaining Ring (2) At Catches (3) And Remove Towards Rear

Installation: Catches (1) on door mirror (2) must not be damaged.

Fig 2: Catches (1) On Door Mirror (2) Must Not Be Damaged