51 16 Mirrors, Finishers, Ashtrays, Consoles
MIRRORS, FINISHERS, ASHTRAYS, CONSOLES - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Mirror to front door | E31 / E36 / Z3 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E65 / E66 / E67 / E83 / E85 / E86 | First screw connection for new mirror | 6 Nm | |
| Only for new rearview mirror (replacement) for initial screw connection (shaping of thread-cutting screws) | E46 / E53 / E60 / E61 / E63 / E64 / E65 / E66 / E67 / E83 / E85 / E86 | 8 Nm | |||
| 2AZ | Center console (plastic nut) | E30 | 5 Nm | ||
| 3AZ | Wooden finisher on carrier | E38 | 0.6 Nm | ||
| 4AZ | Wooden finisher on carrier | E38 | 0.8 Nm | ||
| 5AZ | Wooden finisher on carrier | E38 | 0.7 Nm | ||
| 6AZ | Cup holder, front, on function carrier | E38 | 1.3 Nm | ||
| 7AZ | Wooden finisher on cup holder, front | E38 | 0.5 Nm | ||
| 8AZ | Screw-in pin to wooden finisher of instrument panel and door panel | E46 | 0.3 Nm | ||
| 9AZ | Housing for rearview mirror to carrier | E46 M3 Coup | 1.3 Nm | ||
| E60 M5 / E63 M6 | 0.7 Nm | ||||
| E85 / E86 | 1.1 Nm | ||||
| 10AZ | Brush cable unit to function carrier | E65 / E66 / E67 | 0.5 ± 0.1 Nm | ||
| 11AZ | Roller sun blind to function carrier | E65 / E66 / E67 | 0.5 ± 0.1 Nm | ||
| 12AZ | Roller sun blind to brush cable unit | E65 / E66 / E67 | 1.2 ± 0.2 Nm | ||
| 13AZ | Flap to storage box | E85 / E86 | 0.5 Nm | ||
| 14AZ | Rearview mirror retaining ring on reinforcement plate | E60 M5 / E63 M6 | 1.1 Nm | ||
| 15AZ | Notch adapter to mirror base | E60 M5 / E63 M6 | 3.0 Nm | ||