51 43 075 Removing and installing/replacing side trim panel, footwell, on A-pillar, right

Necessary preliminary tasks: 

• Remove front entrance cover strip (inside)  (See 51 47 000 REMOVING AND INSTALLING/REPLACING FRONT (INSIDE) LEFT OR RIGHT ENTRANCE COVER STRIP )
• Remove trim for instrument panel, bottom left  (See 51 45 181 REMOVING AND INSTALLING/REPLACING TRIM FOR INSTRUMENT PANEL, BOTTOM RIGHT )

Detach mucket (1) in area of panel (3).

Release screw (2).

Unclip panel (3) in direction of arrow at retaining points (4) and remove.

Installation: 

If necessary, lever out clips (1) remaining in bores.

If necessary, replace faulty clips (1).

Make sure lugs (2) are correctly seated in associated mountings.

Position panel (3) preinstalled with clips (1) on associated bores and clip in to place.