61 31 054 Removing and installing/replacing center console switch cluster (with CCC/ASK)

Necessary preliminary tasks: 

• Remove Decorative Strip On Instrument Panel On Right 
• Remove Operator Unit For Heater/Air Conditioner 

Unclip trim (3) at fastening points (1) and (2).

Feed out associated ribbon cable and remove trim (3) complete with center console switch cluster (4).

Fig 1: Identifying Centre Console Switch Cluster, Trim, Fastening Points And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Unclip center console switch cluster (1) at fastening points (2) and (4) and remove.

Installation: 

Make sure center console switch cluster (1) engages correctly in upper fastening points (4) and lower fastening points (2).

Fig 2: Identifying Fastening Points, Ribbon Cable, Centre Console Switch Cluster And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.