64 11 378 Removing and installing/replacing heater/air conditioner operator unit (version with CCC/ASK)

IMPORTANT: Read and comply with notes on Protection Against Electrostatic Damage (ESD Protection)!

NOTE: C ar C ommunication C omputer (CCC)

A udio S ystem K ontroller / Controller (ASK)

Necessary preliminary tasks:

NOTE: Unclip the heater/air conditioner operator unit (2) by simultaneously

Fit special tool 00 9 340 on either side as illustrated.

Unclip heater/air conditioner operator unit (2) complete with trim (1) at fastening points (4) and pull back.

Unlock associated plug connections and disconnect.

Remove heater/air conditioner operator unit (2) complete with trim (1).

Fig 1: Trim, Heater/Air Conditioner Operator Unit, Control Button, Fastening Points And Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carefully unclip operator unit trim (1) at inner retaining points (2) only.

IMPORTANT: Risk of damage to operator unit!

Fig 2: Operator Unit Trim And Retaining Points

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully unclip operator unit trim (1) at outer retaining points (2) only.

Remove trim (1) from operator unit (3).

IMPORTANT: Risk of damage to operator unit (3)!

Fig 3: Operator Unit Trim, Retaining Points And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: