61 35 950 Removing and installing (replacing) control unit for comfort access system

Necessary preliminary tasks: 

• Remove Trim From Rear Apron
• Remove Right Luggage Compartment Trim Panel
• Partially detach insulating mat

Release screws (1) and pull back device holder (2).

Fig 1: Identifying Screws And Device Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Unlock catch (2) in direction of arrow and remove control unit for comfort access system (3) upwards from device carrier (4).

Fig 2: Identifying Comfort Access System Control Unit, Plug Connection, Catch And Device Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out programming/coding.Programming/Coding.