63 17 060 Removing and installing (replacing) left or right front fog lamp

WARNING: This page is about a different variant/trim than selected.

NOTE: The time value of this job does not include adjustment of the Fog Lamps !

Necessary preliminary tasks:

Disconnect plug connection (1).

Unfasten screws (2).

Remove fog lamp (3) towards rear from bumper trim (4).

Fig 1: Identifying Fog Lamp, Plug Connection, Bumper Trim And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Version with M Technic aerodynamic kit:

Disconnect plug connection (1).

Unfasten screws (2).

Remove fog lamp (3) towards rear from bumper trim.

Installation:

Tab (4) of fog lamp (3) must be correctly seated in holder (5).

Fig 2: Identifying Plug Connection, Screws, Tab, Bumper Trim And Fog Lamp

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Adjust front Fog Lamps .