LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Audio, Navigation, Anti-Theft And Restraints - Repair - E90/E91) >> 75 Anti-theft alarm system >> 65 75 071 Removing and installing (replacing) module for passenger compartment sensor

65 75 071 Removing and installing (replacing) module for passenger compartment sensor

WARNING: This page is about a different variant/trim than selected.
IMPORTANT: Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection) .

Necessary preliminary tasks: 

Open retaining hooks (1) and feed module for passenger compartment sensor (2) in direction of arrow out of trim (3) and remove.

Installation: 

Retaining hooks (1) must not be damaged.

Fig 1: Identifying Retaining Hooks, Passenger Compartment Sensor Module And Trim
G04727961Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out programming/coding.

scientia non olet · About LEMON Manuals