33 55 040 Replacing stabilizer links for stabilizer

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Release nut (1), gripping with special tool 31 1 140 in the process.

Installation:

Replace self-locking nut.

For tightening torque refer to 33 55 2AZ in 33 55 STABILIZER BAR .

Release screw (3).

For tightening torque refer to 33 55 3AZ in 33 55 STABILIZER BAR .

Remove stabilizer link (2) towards top.

Fig 1: Identifying Stabilizer Link, Screw And Nut

Courtesy of BMW OF NORTH AMERICA, INC.