33 10 ... Removing and installing/replacing vibration damper

WARNING: This page is about a different variant/trim than selected.

Variant A:

Release screw (1).

For tightening torque refer to 33 17 2AZ in 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS .

Remove vibration damper (2).

Fig 1: Identifying Vibration Damper And Mounting Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Variant B:

Release bolt (1) and remove vibration damper (2).

For tightening torque refer to 33 17 3AZ in 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS .

Fig 2: Identifying Vibration Damper And Mounting Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Variant C:

NOTE: Removal depicted on left vibration damper.

Release bolt (1) and remove vibration damper (2).

For tightening torque refer to 33 17 3AZ in 33 17 REAR AXLE DIFFERENTIAL MOUNTINGS .

Fig 3: Identifying Left Vibration Damper And Mounting Bolt

Courtesy of BMW OF NORTH AMERICA, INC.