51 16 000 Removing and installing/replacing mirror on left or right front door

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

IMPORTANT: Secure door mirror against falling down.

Disconnect plug connection (1).

Release screws (2).

For tightening torque refer to 51 16 1AZ in 51 16 MIRRORS, FINISHERS, ASHTRAYS, CONSOLES .

Replacement:

Due to the thread-tapping screws, the tightening torque of the new mirror is increased by 2 Nm.

For tightening torque refer to 51 16 1AZ in 51 16 MIRRORS, FINISHERS, ASHTRAYS, CONSOLES .

Fig 1: Identifying Front Door Mirror Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove mirror (1) outwards.

Installation:

Check function.

Fig 2: Identifying Front Door Mirror

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Acoustic insulation (1) must not be damaged.

Fig 3: Identifying Front Door Acoustic Insulation

Courtesy of BMW OF NORTH AMERICA, INC.