23 11 614 Replacing guide tube for clutch release unit (GS6-37BZ/DZ)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 328xi, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (transmission removed)

Necessary preliminary tasks:

Remove Clutch Release Bearing And Release Lever from guide tube.

Unfasten screws.

Remove guide tube (1).

Installation:

Clean thread.

Install screws with Loctite 243.

For tightening torque refer to 23 11 2AZ in HOUSING WITH COVER .

Fig 1: Identifying Guide Tube Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Remove sticker (1) and adhesive with a suitable solvent.

Fig 2: Identifying Sticker

Courtesy of BMW OF NORTH AMERICA, INC.