51 61... Removing and installing/replacing protecting skid/mounting bracket (convertible): Notes
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle.
Driving without the protective skid/mounting bracket is not permitted!
Driving without the protective skid/mounting bracket is not permitted!
Necessary preliminary tasks:
Release screws (1).
Tightening torque: see Fig 1
Release screw (3).
Tightening torque: see Fig 1
Release screws (2) and remove protective skid (4).
Tightening torque: 50 Nm
Installation:
Replace all screws.
Middle lug of protective skid must be situated between mounting bracket and left diagonal strut.