51 71... Removing and installing/replacing radiator seal
WARNING:
Scalding hazard!
Only perform work after engine has cooled down.
Only perform work after engine has cooled down.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle.
Driving without the diagonal strut is not permitted!
Driving without the diagonal strut is not permitted!
Necessary preliminary tasks:
NOTE:
Prior to removing, pay attention to the exact installation position with respect to the adjoining components.
Release screws (1).
If necessary, remove underbody protection bracket.
Release catches (2) and feed out radiator seal (3) towards rear.
Installation:
Catches (1) must not be damaged