51 47 440 Removing and installing/replacing rear carpet on seat pan

Necessary preliminary tasks: 

• Remove left/right Front Seat 
• Remove Storage Compartment  
• Remove Handbrake Lever 
• Remove Rear Side Trim   left/right
• Remove inside Entrance Cover Strip  

Version with central bass speaker: 

• Remove Central Bass Speaker Trim  on left/right

E92 only: 

Lever out cap (1).

Release bolt (2).

Tightening torque value = 36 Nm.

Feed out belt and slide bar.

Installation: 

Make sure slide bar and grommet are correctly positioned.

Check that spacer bushing (3) and rubber ring (4) are in correct position.

Remove holder (1).

Pull back cable (2) with cable holder (3).

Feed out carpet (4).

Installation: 

Make sure openings for air duct and attachment points are correctly positioned.