52 13 000 Removing and installing left or right front seat (normal / manual)

Necessary preliminary tasks:

WARNING: Read and comply with Safety Regulations for handling airbag modules and pyrotechnical belt tensioners.

Improper handling can lead to triggering of the pyrotechnical seat belt tensioner or side airbag, resulting in injuries.

Switch off ignition.

Release screws (1).

Installation:

Replace screws.

For tightening torque refer to 1AZ in 52 10 FRONT SEATS

Move front seat as far back as possible.

Fig 1: Identifying Seat Rail Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (3).

Installation:

Replace screws.

For tightening torque refer to 1AZ. in 52 10 FRONT SEATS

Unlock plug connection (1) and disconnect plug (2).

IMPORTANT: Cover door sill with protective covers (risk of damage).

Lift out front seat.

Fig 2: Identifying Plug Connection, Plug Connection Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Carpet must not get between seat rails and floor pan in area of fastening points (grating noises).