64 11 377 Removing and installing (replacing) control panel for heater - A/C system

Necessary preliminary tasks: 

• Remove middle trim for instrument panel. See 51 45 310 REMOVING AND INSTALLING (REPLACING) CENTER TRIM FOR INSTRUMENT PANEL .

Release screws (1).

Unclip control panel for heater - A/C system (2) all round and remove from middle trim for instrument panel (3).

Fig 1: Uncliping Control Panel For Heater - A/C System

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Using BMW scan tool, carry out programming/coding.