51 45 310 Removing and installing (replacing) center trim for instrument panel (up to 03/2007)

Necessary preliminary tasks: 

• Remove DECORATIVE STRIP ON INSTRUMENT PANEL ON RIGHT .

Release screws (1).

Unclip upper retaining points (3) by pressing screwdriver (2) towards front.

Unclip lower retaining points (5).

Unlock associated plug connections and disconnect.

Remove center trim for instrument panel (4).

Fig 1: Removing Center Trim For Instrument Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• Remove CONTROL PANEL FOR HEATING - A/C SYSTEM .
• Remove CENTER CONSOLE SWITCH CENTER .