LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2005 >> 525i Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Body Equipment - Repair) >> Trunk Latch, Locks >> 51 24 110 Removing and installing/replacing lock for rear lid upper section

51 24 110 Removing and installing/replacing lock for rear lid upper section

WARNING: This page is about a different car, the 2006 BMW X5, 2005 BMW X5, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear window wiper motor. Refer to 61 62 060 REMOVING AND INSTALLING / REPLACING REAR WINDOW WIPER MOTOR .

Disconnect plug connection (2).

Fig 1: Removing Rear Lid Lock
G03268267Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove rear lid lock (3).

Unclip emergency actuating mechanism (1) from rear lid lock (2).

Fig 2: Identifying Emergency Actuating Mechanism
G03268268Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Adjust rear lid latch (striker) for upper section of rear lid lock. Refer to 41 62 030 Fitting rear lid upper section .

CAUTION: Closing bracket and rear lid lock must not be greased.