11 36 048 Removing and installing/replacing inlet and exhaust adjustment units on right side (N62): Notes
WARNING: This page is about a different variant/trim than selected.
Special tools required:
- 11 9 190
- 11 9 460
- 11 9 461
- 11 9 462
- 11 9 463
(cylinder bank 1 to 4)
Read fault memory and make a documentary record.
Remove servomotor for right eccentric shaft.
Remove right cylinder head cover
Remove all spark plugs on cylinder bank 1 to 4.
If necessary, remove fan cowl.
Remove right timing case cover .